DRIP LATERAL FITTING

Drip Fittings

STARTER CONNECTOR

  • Used for connecting sub mains to laterals.
  • Used along with grommet to prevent leakage.
  • Made from 100% virgin material for long life.

Drip Fittings

RUBBER GROMMET

⦁ Used along with starter connector to connect lateral to sub mains.
⦁ Prevents leakage of water in the joint.
⦁ Made from 100% virgin material for long life.
⦁ Available in Natural Rubber, Nitrile & EPDM.

Drip Fittings

END CAP

⦁ Used for closing the lateral at the end.
⦁ Used for flushing of lateral.
⦁ Easy to open & close.
⦁ Made from 100% virgin raw material for long life.

Drip Fittings

PIPE CONNECTOR (DOUBLE BARBED JOINER)

⦁ Used for joining ends of two laterals.
⦁ Ensures leak proof joint.
⦁ No need for any adhesive.

Drip Fittings

TEE CONNECTOR (DOUBLE BARBED TEE CONNECTOR)

⦁ Used for taking branches from laterals.
⦁ Ensures leak proof joint.
⦁ No need for any adhesive.
⦁ Made from 100% virgin raw material for long life

Drip Fittings

ELBOW CONNECTOR (DOUBLE BARBED ELBOW)

⦁ Used for taking 90˚ turn of Lateral Pipe.
⦁ Made from 100% virgin raw material for long life.
⦁ Ensures leak proof joint.
⦁ No need for any adhesive

Drip Fittings

HOLD DOWN STAKE FOR 16mm

⦁ Used for holding the lateral firm on the ground & prevents disturbance of lateral by Labours / Animals.
⦁ Made from 100% virgin raw material for long life.

Drip Fittings

GOOF PLUGS

⦁ Used to close the unwanted holes made on Lateral Pipe.

Drip Fittings

LATERAL PUNCH

⦁ Used to make holes on Lateral Pipe to insert Emitter or Pin Connector.

Suitable for 2mm, 2.5mm, 6mm microtubes

Drip Fittings

MICRO TUBE PEGS (SUPPORTING STAKE)

⦁ Used to hold the Micro Tube & Dripper / Emitter in Place.

Drip Fittings

DIRECTOR (THREADED NIPPLE)

⦁ Used to connect the Laterals from threaded outlet on Sub mains.

Drip Fittings

SPIRAL BARBED THREADED ELBOW

⦁ Used to connect the Laterals from threaded Outlet at 90˚ angle.